Teltonika RUTX10 Industrial Ethernet Router

Teltonika RUTX10 Industrial Ethernet Router Technical Specs

ETHERNET

WAN

• 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

LAN

• 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

WIRELESS

Wireless mode

• 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

Wi-Fi security

• WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect

SSID/ESSID

• ESSID stealth mode

Wi-Fi users

• Up to 150 simultaneous connections

Wireless Connectivity Features

• Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter

• Whitelist, blacklist

Wireless QR code generator

• Once scanned, a user will automatically enter your network without needing to input login information

BLUETOOTH

Bluetooth 4.0

• Bluetooth low energy (LE) for short-range communication

NETWORK

Routing

• Static routing
• Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
• Policy-based routing

Network protocols

• TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support

• H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

• Ping Reboot
• Wget Reboot
• Periodic Reboot
• LCP
• ICMP for link inspection

Firewall

• Port forward, traffic rules, custom rules

Firewall status page

• View all your Firewall statistics, rules, and rule counters

Ports management

• View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology

• Visual representation of your network, showing which devices are connected to which other devices

Hotspot

• Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, an individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

DHCP

• Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM)

• Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS

• Supported >25 service providers, others can be configured manually

Network backup

• Wi-Fi WAN, VRRP, and Wired options, each of which can be used as an automatic Failover

Load balancing

• Balance Internet traffic over multiple WAN connections

SSHFS

• Possibility to mount remote file system via SSH protocol

VRF support

• Initial virtual routing and forwarding (VRF) support

SECURITY

Authentication

• Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall

• Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

• DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN

• Port and tag-based VLAN separation

WEB filter

• Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control

• Flexible access control of SSH, Web interface, CLI, and Telnet

VPN

OpenVPN

• Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption

• DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec

• IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE

• GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP

• Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel

• Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN

• Method of building scalable IPsec VPNs

SSTP

• SSTP client instance support

ZeroTier

• ZeroTier VPN client support

WireGuard

• WireGuard VPN client and server support

Tinc

• Tinc offers encryption, authentication, and compression in its tunnels—client and server support.

Tailscale

• Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open-source WireGuard protocol

OPC UA

Supported modes

• Client, Server

Supported connection types

• TCP

MODBUS

Supported modes

• Server, Client

Supported connection types

• TCP, USB

Custom registers

• MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats

• 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

Protocol

• HTTP(S), MQTT, Azure MQTT, Kinesis

Data to server

• Extract parameters from multiple sources and different protocols, and send them all to a single server

MQTT GATEWAY

Modbus MQTT Gateway

• Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

Supported modes

• Station, Outstation

Supported connection

• TCP, USB

DLMS

DLMS Support

• DLMS - standard protocol for utility meter data exchange

Supported modes

• Client

Supported connection types

• TCP, USB

API

Teltonika Networks Web API (beta) support

• Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data.

MONITORING & MANAGEMENT

WEB UI

• HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA

• Firmware update from server, automatic notification

SSH

• SSH (v1, v2)

TR-069

• OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

• MQTT Broker, MQTT publisher

SNMP

• SNMP (v1, v2, v3), SNMP Trap

JSON-RPC

• Management API over HTTP/HTTPS

RMS

• Teltonika Remote Management System (RMS)

IOT PLATFORMS

Cloud of Things

• Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx

• Allows monitoring of: WAN Type, WAN IP

Cumulocity

• Allows monitoring of Device Model, Revision and Serial Number, WAN Type and IP

Azure IoT Hub

• Can send device IP, Number of bytes sent/received, Temperature, and PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

• CPU: Quad-core ARM Cortex A7, 717 MHz
• RAM: 256 MB, DDR3
• FLASH storage: 256 MB, SPI Flash

FIRMWARE / CONFIGURATION

• WEB UI: Update FW from a file, check FW on the server, configuration profiles, configuration backup
• FOTA: Update FW
• RMS: Update FW/configuration for multiple devices at once
• Keep settings: Update FW without losing the current configuration
• Factory settings reset: A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

FIRMWARE CUSTOMISATION

Operating system

• RutOS (OpenWrt based Linux OS)

Supported languages

• Busybox shell, Lua, C, C++, and Python, Java in Package manager

Development tools

• SDK package with build environment provided

GPL customisation

• You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your client's needs

LOCATION TRACKING

NTRIP

• NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

USB

Data rate

• USB 2.0

Applications

• Samba share, USB-to-serial

External devices

• Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage formats

• FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

INPUT / OUTPUT

Input

• 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output

• 1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events

• Email, RMS

I/O juggler

• Allows to set certain I/O conditions to initiate an event

POWER

Connector

• 4-pin industrial DC power socket

Input voltage range

• 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection

PoE (passive)

• Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC

Power consumption

• 9 W Max

PHYSICAL INTERFACES

• Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps
• I/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
• Status LEDs: 8 x LAN status LEDs, 1 x Power LED, 2 x 2.4G and 5G Wi-Fi LEDs
• Power: 1 x 4-pin power connector
• Antennas: 2 x RP-SMA for Wi-Fi, 1 x RP-SMA for Bluetooth
• USB: 1 x USB A port for external devices
• Reset: Reboot/User default reset/Factory reset button
• Other: 1 x Grounding screw

PHYSICAL SPECIFICATION

Casing material

• Aluminium housing

Dimensions (W x H x D)

• 115 x 32.2 x 95.2 mm

Weight

• 355 g

Mounting options

• DIN rail, wall mount, flat surface (all require additional kit)

OPERATING ENVIRONMENT

• Operating temperature: -40 °C to 75 °C
• Operating humidity: 10% to 90% non-condensing
• Ingress Protection Rating: IP30

REGULATORY & TYPE APPROVALS

Regulatory

• CE, UKCA, EAC, UCRF, CITC, ICASA, ANRT, FCC, IC, PTCRB, RCM, IMDA, SIRIM, NTC, E-mark, Railway, UL/CSA Safety, CB

Regulatory

• CE, UKCA, EAC, UCRF, CITC, ICASA, ANRT, FCC, IC, NOM, UL/CSA Safety, Anatel, Giteki, CB

EMC EMISSIONS & IMMUNITY

Standards

• EN 55032:2015 + A11:2020
• EN 55035:2017 + A11:2020
• EN 301 489-1 V2.2.3
• EN 301 489-3 V2.1.2
• EN 301 489-17 V3.2.4

Radiated Immunity

• EN IEC 61000-4-3:2006 + A1:2008 + A2:2010

EFT

• EN 61000-4-4:2012

Surge Immunity (AC Mains Power Port)

• EN 61000-4-5:2014 + A1:2017

CS

• EN 61000-4-6:2014

DIP

• EN 61000-4-11:2004

RF

Standards

• EN 300 328 V2.2.2
• EN 301 893 V2.1.1
• EN 300 440 V2.2.1

SAFETY

Standards

• CE: EN IEC 62368-1:2020 + A11:2020, EN 62311:2020
• RCM: AS/NZS 62368.1:2022
• CB: IEC 62368-1:2018